How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add another key. It requires dealer service with a handheld computer called Tech-2. Then the transponder is replaced and a key must be purchased.
It is a good idea to rotate your keys in order that one does not get damaged faster than the other. This will also help to keep your keys in top shape.
Replacement Case
The new key fobs aren't like the older Saab keys. They have electronics which make it hard to duplicate. This has made theft of cars a lot more complicated than it was 20 years ago. It also makes it more expensive to replace lost keys.
Saab 9-3 owners should have two keys that work. It's expensive to replace a lost key as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100-$200 for this.
There are a few ways to avoid these high cost. Some parts dealers will find the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new key blade out of metal for a fraction of the dealer's cost. The key must be exactly the same as the original in order for it to function in your vehicle.
You can also replace the case yourself by following these steps. You will need to have a flathead and patience. With the screwdriver, pry apart the plastic and remove the emergency key. Once you have the case open, remove the electronic components and put them back into your new case. Make sure you insert the correct key and badge back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable component that can be replaced quickly and easily. Cyclone's YouTube video Cyd demonstrates how to replace the battery of the remote fob with just four simple steps. This tutorial should work with any modern Saab key fob. However, the process may differ slightly.
The first step is to locate the button that releases the backup key in the fob. It's usually just below the Saab logo on the back of the fob. Next you will need an screwdriver with a flat head to insert into the tiny hole in this button. This should be sufficient to allow you to open the fob case in order to change the battery.
After replacement saab key www.g28carkeys.co.uk have installed the new batteries CR1632, you can reassemble the remote key fob. You can then program it into your car. The entire process should not take more than an hour, if not less. This is a simple process that doesn't require any special tools.
The procedure is a little more complicated if you've lost your key, but it's possible. The dealer needs to first determine the VIN of the vehicle, and then purchase an alternative TWICE module, as well as a key blade that has the correct unique code. The dealer will then need to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob is the part that locks and unlocks your car. It has batteries inside. The batteries have a lifespan and will eventually fail. It's a common issue for all vehicles. The good news is that you can replace the battery in all key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronic components in place. It is easy to open the case and replace the batteries. It's important to note that you'll need to take out the emergency key first, and you can do this by putting the small screwdriver flathead into the slot that is located in the middle of the case. The case will split once you rotate the screwdriver around it.
If you are about to replace the keys ensure you have a spare as this can reduce your total cost by a substantial amount. If you have an additional key, you can ask the dealer to cut it in half and program it to your car. This is less expensive than purchasing a brand new key fob.
It is possible to add another key to your vehicle in the event that you don't have one, but it requires an extensive amount of research and effort. The cost of adding a second key is a few hundred dollars, and it requires programming of the car's computer. Professionals can accomplish this however it's a costly option.
Replacement Ignition
The latest SAAB 9-3 uses an advanced alarm system that is based on a key code. This means that should you lose only one functioning key, getting another one could be very expensive because the car needs to have a computer module installed and it must also be specifically programmed to accept an additional key. Most locksmiths can't do this and dealers will charge hundreds of dollars just to program the new key!
If you've lost your only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to create a replacement, and will charge top dollar for it. Instead we can reprogram the EEPROM on your existing car computer, preparing it for a new key, saving you over 50% of what you'll pay at a dealership.
If you've owned a SAAB 9-3 for a long time and you're aware of the ignition keys are not very durable. If the ignition key you have isn't working correctly, you should think about replacing it. They can become extremely sticky and the buttons have been known to fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it is able to be accomplished quickly.